98VA/294QR

Tool set with tool trolley No. 98VA/294QR

98VA/294QR

Tool set with tool trolley No. 98VA/294QR

Set of tools with Tool Trolley No. 98VA/294QR

100% increased drawer volume compared to 90, 95 and 95VA

Tool trolley with three-stage safety logic:

- central locking with a cylinder lock and fold-down key

- individual locks prevent inadvertent opening in transit

- topple-proof - it is not possible to pull out more than one drawer at a time

Drawer identification by several stickers per drawer (sheet with stickers included in delivery)

  • Stainless steel handle with reinforced connection to body
  • Impact protection strips with wrap-around bumper
  • Particularly tough, oil and skydrol resistant worktop made of ABS with compartments for small components
  • Oil and acid resistant low-friction wheels (D.125 mm) with carpet protection to prevent ingress of dirt and fibres into bearings, with two parking brakes
  • Paper-roll holder
  • STAHLWILLE green, drawers in two colours (silver with black full-width handle)
  • Perforations from both sides for hooks No 8031-8041, e.g. for larger tools
  • Can be enhanced with STAHLWILLE Standard and TCS inlays

Contents: 294-piece:

1 workshop trolley 98/VA6 A + torque wrench no. 721QR/20 QUICK

 

97830146 818/4

1 QuickRelease extensions No. 405QR/2 6.3 mm (1/4") L.54mm

1 QuickRelease extensions No. 405QR/4 6,3 mm (1/4") L.100mm

1 Bit holder No. 412 6,3mm (1/4") inner square 6,3mm (1/4") L.25mm

1 universal joint No. 407QR 6,3mm (1/4") L.54mm

2 sockets No.40 TX 1/4" E7; E8

1 socket handle No. 400QR, 1/4" L.150mm 2K handle

10 sockets 6,3 mm (1/4") No.40 hexagon SW 5; 5,5; 6; 7 ;8; 9 ;10; 11;12; 13 mm

8 screwdriver bits 1/4" for internal TORX® screws No.44 KTXB; T8; T10; T15; T20; T25; T27; T30; T40

5 INHEX sockets 1/4" for hexagon socket screws No.44 K: SW 3; 4; 5; 6; 8 mm

1 reversible ratchet No.415QR N with QuickRelease, 1/4" RSW4,5° L.117mm

1 cross handle with slide No.404QR 1/4" L.116mm

1 Reducer No.513, 1/2 to 3/8" L.35mm

1 socket extensions No.527QR/10 with QuickRelease, 3/8" L.240mm

1 QuickRelease fine tooth ratchet No.435QR N 10mm (3/8") RSW4,5° L.193mm

1 Cross handle with slide No.425QR N 3/8" L.165mm

1 universal joint 3/8" No.428 L.46mm

1 reducer No.431, 3/8 to 1/4" L.28mm

1 socket extension No.427QR/3 6,3 mm (1/4") L.76 mm

15 sockets 3/8" with hexagon No.456: 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm

4 sockets no.45 TX 3/8" SW E8; E10; E12; E14

2 Screwdriver sockets for internal TORX® screws No.49 TX 3/8" T25; T45

3 Screwdriver bits for INHEX screws No.49 3/8" SW 5; 6; 8mm

4 Screwdriver bits for internal TORX® screws No.1054TX/2054TX 1/2" T40; T45; T50; T55

2 Screwdriver bits for INHEX screws No.54 1/2" SW 10; 12mm

4 screwdriver bits for internal TORX® screws No.54 TX 1/2" T40; T50; T55; T60

1 reversible ratchet No.512QR N with QuickRelease, 1/2" RSW4.5° L.265.5mm

1 cross handle w.sliding piece Nr.506QR 1/2" L.300mm

1 socket extensions Nr.509QR/10 with QuickRelease, 1/2" L.255mm

1 universal joint 1/2" No.510QR L.80mm

1 socket extensions No.509QR/5 with QuickRelease, 1/2" L.130mm

17 sockets 12,5 mm (1/2") No.52 hexagon SW 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm

1 enlarger No.432, 3/8 to 1/2" L.31mm

1 offset screwdriver No.10760 CV 7 for INHEX screws SW 7mm

 

15 ratchet combination wrench OPEN-RATCH No.17 SW 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24mm

1 socket wrench extension No.509/5 IMP 12,5 mm (1/2") L.130mm

11 IMPACT sockets No.50 IMP 1/2" SW 8; 10; 11; 12; 13; 14; 15; 16;17; 18; 19mm

8 IMPACT sockets No.51 IMP 1/2" long SW 13; 15; 16; 17; 19; 21; 24; 27mm

4 IMPACT sockets No.2309 1/2" long slim SW 17; 19; 21; 22 mm

1 ball joint piece No.510 IMP 1/2" L.52mm

 

1 telescopic hollow mirror No.13120N L.310-750mm

1 telescopic stainless steel mirror No.12921M mirror d.32mm L.171-699mm

2 nut splitters No.12615 for nuts SW 10-18; 19-27mm

1 release lever No.12770-2K N L.260mm

1 release lever No.12770/2 L.185mm

1 Socket No.1062 1/2" SW 27mm for injectors

1 VDE power side cutter No.6602, L.160mm

1 combination pliers No.6501, L.180mm 2K-handle

1 VDE flat nose pliers No.6529, L.200 mm 2K-handle

1 water pump pliers No.6551, L.240mm adjustable 7x jaw opening max.34 mm

1 cable knife No.12320 blade L.90 mm stainless steel

1 plastic lever No.12770 3 L.300mm

1 caliper no.12900N, measuring range 150 mm

1 rolling tape measure No.12935/3 tape l.3m w.locking device

 

5 slotted screwdrivers DRALL+ No.4621: 0,4x2,5x80, 0,5x3,5x90; 0,6x4,0x100; 1x6,5X140; 1,2x8,0X160mm

2 Phillips screwdriver DRALL+ No.4631 PH1; PH2 long 2K handle

3 Phillips screwdrivers DRALL+ No.4632 PH1; PH2; PH3 2K handle

1 slotted screwdriver DRALL No.4724 0,6x3,5mm

1 Phillips screwdriver DRALL+ No.4734, PH2 L.25mm 1K-handle

1 Screwdriver No.10506 0,8x4,0x300 L.350mm

1 Screwdriver No.10518 1,0x5,5x410 L.525mm

1 magnetic lifter No.12600, tractive force 500g L.500mm

1 claw gripper No.12922E L.540mm

 

96830213TCS 13/240/21/6

21 Combination wrenches OPEN-BOX No. 13: SW 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

6 ratchet wrenches Fastratch no. 240 SW 8-5/16; 10-3/8; 13-1/2; 14-9/16; 17-21/32; 19-3/4

 

96830214 TCS KABELEX

6 unlocking tools KABELEX® No. 1553; 1556; 1559; 1562; 1574; 1591

3 extraction tools No. 1501+1511; 1502+1512; 1503+1513

1 wire stripping knife with hook blade No. 12697

1 LED flashlight No. 13128

5 HSS high performance twist drills (3.2; 4.8; 6.4; 8; 8.7 mm)

5 special steel unscrewing pins size 1-5 for threads M5-M16

5 unscrewing nuts size 1-5

10 drill bushes size 1-10

1 soft-face hammer No.10959 35 D.35mm L.335mm

1 locksmith's hammer No.10961 500g with ash handle

1 hose clamp pliers CLIC No.10615/1 L.200 mm

 

6830215 TCS 12171/12174 VDE

14 VDE Sockets 10 mm (3/8") No. 12171 VDE Double hexagon SW 7; 8; 9 ;10; 11;12; 13; 14; 16; 18; 19; 20; 22 mm

5 VDE Sockets 10 mm (3/8") No. 12174 VDE TORX® T20; T25; T30; T40; T45

3 VDE Socket extensions 10 mm (3/8") No. 12167 VDE Gr. 3; 6; 10

 

96830216 TCS 4798 VDE

1x 2-component handle

1x clip-on rotating cap

slotted screwdriver size 2.5 x 0.4; 3.0 x 0.5; 3.5 x 0.6; 4.0 x 0.8; 5.5 x 1.0; 6.5 x 1.2 mm

Phillips screwdriver PH1; PH2

Phillips screwdriver PZ2

TORX® screwdriver T10; T15; T20

1 VDE combination pliers no. 6501, L.180 mm 2K handle

1 VDE Flat nose pliers No.6530 5 L.200 mm

1 VDE Side cutters No.6600 5 160, L.160mm 2K-handle

1 VDE Stripping pliers No.6623, L.160 mm

1 VDE cable knife No.12188 blade L.40mm

1 Self-clamping VDE insulating cable-end cap No. 12194 D.10mm

1 Self-clamping VDE insulating cable-end cap No. 12194 D.20mm

Technical Information:

Code 98830122
EAN Code 4018754330010
Article Number 98VA/294QR
Number of tools 294
Store-locator
CodeMaßeNumber of drawersNumber of tools
98830122652 x 1000 x 1024 mm6294