7794-2

Motor-driven calibration and adjustment device from 1 to 400 N·m No. 7794-2

7794-2

Motor-driven calibration and adjustment device from 1 to 400 N·m No. 7794-2

The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches

  • measurement possible without moving the point of application of force
  • prevents faulty readings thanks to precision-mounted spindle and finely regulated motor
  • extremely accurate calibration thanks to optimised bearings and square drives for the transducers
  • rapid, easy change of transducers thanks to quick-release latching system
  • convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation
  • saves time because the bridge support is locked in place using a single-handed eccentric lever
  • transmission of readings to a PC via USB interface for further processing, analysis and archiving
  • calibration certificates can be printed or saved as a PDF file after calibration
  • as found / as left calibrations can be documented
  • during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request
  • can be upgraded to perfectControl calibrating unit No 7794-3 for angle-controlled wrenches
  • calibration up to 1000 N·m is possible using the easily attached extension unit No 7791-1 <!-- (see p. [171220]) -->
  • design patent
  • other patents applied for
  • both clicking and indicating torque wrenches can be calibrated

Calibration of transducers is possible using reference torque wrenches No 7770-100 and 7770-1000, available on request.

Content: 6 calibrating square drive insert tools No 734K (sizes 4, 5, 12, 20, 40, 100), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, 1 software Torkmaster 7731-1, 1 jack cable No 7751, 1 spiral cable No 7752, 1 spiral cable No 7751-2 with jack plug and self-locking precision plug, 1 low-temperature cable connector, 1 hexagon key wrench No 10760CV size 2 mm are included.

The unit is supplied without the torque wrench, transducers or notebook.

Transducers laboratory No 7728 <!-- (see p. [206238]) -->

Technical Information:

Code 96521093
EAN Code 4018754214891
Article Number 7794 - 2
for transducers 7728 (sizes 1-100)
Store-locator
Code
Capacity
N·m
for transducer
for torque wrenches
with functional length (LF) max. mm
Profile width
mm
b
mm
h
mm
L
mm
R
kg
965210931-4007728 (sizes 1-100)815180640328106058,1